DLM/P
Dynamic Inline Mixer

Dynamic mixing with Pin mixing elements
for shear sensitive products

The INDAG Dynamic Inline Mixer type DLM/P is used for homogeneous mixing of shear sensitive liquids with additives. Additives can be homogeneously mixed in the smallest quantity ratios of less than 0.01%. Also, due to the shape of the mixing elements, the heat input into the product stream is reduced to a minimum. Temperature increases of less than 1°C can thus be kept to a minimum. Temperature-sensitive products can be mixed homogenously in a gentle manner. Some examples from a range of applications are: The mixing of reactive additives with adhesives; the dilution of polymer emulsions; the mixing of polymers with hot water or steam, e.g. for the separation of solvents.

 

Advantages of DLM/P

  • Very good self-cleaning during CIP-cleaning
  • No pressure loss
  • Very good homogeneous mixing result even when mixing in smallest quantities (0.01 %)
  • Efficient introduction of mixing energy
  • Variable mixing energy by speed change via frequency converter 
  • Temperature increase less than 1 °C
  • Applicable at high pressures and high temperatures

Technology of DLM/P

INDAG Dynamic Inline Mixer type DLM/P consists of round shape mixing elements on rotor and in stator (mixer casing). Round shape mixing elements are extremely robust to allow mixing of highly viscous products (> 10,000,000 mPas). Mixing energy is introduced efficiently into product. It is possible (as an option) to heat or cool rotor and stator. The DLM/P is offered in compact design (KB) and in bearing block design (LB). In the compact design, the rotor is mounted  by the output shaft of the motor. In the bearing block design, the rotor is mounted by its own bearing block. With a separate bearing block, longer rotors and thus larger mixing volumes can be realized. Furthermore, this design is also suitable for mixing under high pressure or high temperature. The type of rotor seal is selected to suit each application. For the supply of the double acting mechanical seal INDAG offers the suitable barrier fluid system. INDAG mixers are designed likewise for explosive areas and substances (ATEX).

Positioning
horizontal or vertical position of mixer is possible

Pressure levels
6 bar, 10 bar, 16 bar, 25 bar, 40 bar, 100 bar

Materials
1.4301 (AISI 304), 1.4404 (AISI 316 L), 14462 (AISI 318), Teflon coated, Tantal coated

Seals
Single acting mechanical seal; double acting mechanical seal; stuffing box seal, visco seal

Connections
DIN, ANSI flange and various others on request

Rotational speed
100 rpm to 1,500 rpm

Capacities
50 l/h to 60,000 l/h

Temperatures
0 °C to 250 °C

Viskosities
1 mPas to 10,000,000 mPas

Mixer sizes and capacities of DLM/P

Type DLM/P  Unit 2 3 4 5 6
capacity* l/h 50-800 300-3.000 500-10.000 1.000-20.000 3.000-60.000
connection DN 50 65 80 100 125
optional ASME 2” 2,5” 3” 4” 5”
power* kW 1,5-7,5 2,2-22 4-35 5,5-55 11-75
rotational speed* 1/min 200-1.500 200-1.500 200-1.500 100-1.000 100-1.000
mixing stages KB 8 DLM/P-208 KB DLM/P-308 KB DLM/P-408 KB DLM/P-508 KB DLM/P-608 KB
mixing stages LB 15 DLM/P-215 LB DLM/P-320 LB DLM/P-420 LB DLM/P-520 LB DLM/P-620 LB
*depends on product
Subject to technical modifications.

Dimension drawing of DLM/P with bearing block (LB)

Type Unit A B H* L*
DLM/P-220 LB mm 589 165 312 1700
DLM/P-320 LB mm 595 180 385 2000
DLM/P-420 LB mm 628 210 460 2200
DLM/P-520 LB mm 654 242 460 2300
* depends on the drive

Dimension drawing of DLM/P compact version (KB)

Type Unit A B H* L*
DLM/P-208 KB mm 407 165 148 996
DLM/P-308 KB mm 413 180 190 1027
DLM/P-408 KB mm 446 210 190 1062
DLM/P-508 KB mm 472 242 218 1104
* depends on the drive

Do you have any questions?
Our experts will be happy to help you.
Here you can find our worldwide partners.

Scroll to top
Request information »
#